free plans  home    gallery
 projects    philosophy    faq









mobile workstand free plans: how to make a
Mobile Workstand
Basic Description

watch the
animated intro
This simple workstand is both stable and mobile. It provides a great surface for cutting, routing, sanding, assembly etc. You can roll it around your workspace by simply tipping one end a few degrees to engage the wheels. In the resting position, the wheels are disengaged and this is the key to its stability. There are no obstructions on the underside of the worktop which allows for efficient clamping. These mobile workstands work very well in pairs, so after you finish your first one, you may want to build another!


step:                       10    




Slide the remaining panel into place on top of the shelf supports. Using a straight-edge, mark a cut-line and trim it to size. Mark holes, drill countersunk holes, and fasten the shelf to the shelf supports with 1 5/8" (4cm) screws. We will describe the features and show you how to use the workstand in the following review section.


◄ step 9   —   review ►



free plans © 2000-2008
terms   privacy policy
 home    gallery
 projects    philosophy    faq